Solution à analyserEffectuer des ce

Solution à analyser

Effectuer des cendres totales sur une prise d'essai, p, exactement pesée, voisine de 0.17 g de produit à analyser exactement pesé selon la technique décrite à la Pharmacopée Européenne.

Dans un ballon à col rodé, introduire la totalité des cendres obtenues. Ajouter 10 mL de réactif 1 puis agiter au bain à ultra sons pendant 10 min.
Chauffer sous reflux sur plaque vitrocéramique à 500°C jusqu'à ébullition puis maintenir l’ébullition jusqu'à dissolution complète (15 min environ).

결과 (영어) 1:

Solution to analyzePerform total Ash on a test socket, p, exactly weighed, adjacent to 0.17 g of the product to be analysed exactly weighed according to the technique described in the European Pharmacopoeia.In a balloon to oiled neck, introduce all of the obtained ash. Add 10 mL of reagent 1 and shake to the bath to ultra sounds for 10 minutes.Heat under reflux on plate ceramic at 500 ° C until boiling, then maintain the boil until dissolution full (about 15 minutes).

결과 (영어) 2:

Test solution

Perform total ash on a test sample, p, accurately weighed, next 0.17 g of product to be analyzed carefully measured using the technique described in the European Pharmacopoeia.

In a ground-necked flask, introduce all ashes obtained. Add 10 ml of reagent 1 and shake the ultrasonic bath for 10 minutes.
Heat to reflux on ceramic plate at 500 ° C to boil and continue to boil until dissolved (about 15 min).

결과 (영어) 3:

solutioneffect of total ash in a test sample, p, accurately weighed, next to 0.17 g product to analyze accurately weighed according to the technique described in the european pharmacopoeia.in a ball to pass then, introducing all the ash. add 10 ml of reagent 1 and the ultrasonic wave bath for 10 minutes.heat under reflux in glass-ceramic plate with to boil then simmer until completely dissolved (15 min).